Introduction to MasterCAM – Thursdays (19FL)
MasterCAM software makes CNC machining possible with endless design capabilities. This introductory course will equip you with the tools needed to begin basic programming CNC machines. You will create and run tool paths and test your programs while becoming familiar with the menu structure. Conversion of M codes and G codes syntax will also be discussed.
Active USW employees only.
Eight (8) sessions, Thursday evenings. (No class 11/28)
Class size limited to ten (10).
Tuesday sessions are also available, choose only one.
Introduction to MasterCAM – Tuesdays (19FL)
Dates
| October 2019 | ||||||
|---|---|---|---|---|---|---|
| Su | Mo | Tu | We | Th | Fr | Sa |
1 | 2 | 3 | 4 | 5 |
||
6 | 7 | 8 | 9 | 11 | 12 |
|
13 | 14 | 15 | 16 | 18 | 19 |
|
20 | 21 | 22 | 23 | 25 | 26 |
|
27 | 28 | 29 | 30 | |||
| November 2019 | ||||||
|---|---|---|---|---|---|---|
| Su | Mo | Tu | We | Th | Fr | Sa |
1 | 2 |
|||||
3 | 4 | 5 | 6 | 8 | 9 |
|
10 | 11 | 12 | 13 | 15 | 16 |
|
17 | 18 | 19 | 20 | 22 | 23 |
|
24 | 25 | 26 | 27 | 28 | 29 | 30 |
| December 2019 | ||||||
|---|---|---|---|---|---|---|
| Su | Mo | Tu | We | Th | Fr | Sa |
1 | 2 | 3 | 4 | 6 | 7 |
|
8 | 9 | 10 | 11 | 12 | 13 | 14 |
15 | 16 | 17 | 18 | 19 | 20 | 21 |
22 | 23 | 24 | 25 | 26 | 27 | 28 |
29 | 30 | 31 | ||||
Times
| 5:00 PM - 8:00 PM |
